Kongskilde

MultiAir® blowers

The MultiAir® high pressure blower is the power source in many Kongskilde solutions and can be found in installations all over the world. A great advantage of the MultiAir® is the low noise level and the fact that the MultiAir® is weatherproof. This allows for a flexible positioning of the blower – either inside the production area or outside the facility depending on space availability. Kongskilde offers a number of blower sizes in the MultiAir® 1000, 2000 and 3000 series in both 50 Hz and 60 Hz versions. Optional equipment such as VFD and inlet filter units are available.

Contact Us
Downloads

Related solutions

Separation of recycled material

The Kongskilde Industrial Aspirator (KIA) separates light impurities or dust from re-processed material or granulated plastic. Many recycled materials are a mix of light and dense material, which can be turned into valuable reusable material after separation.
Read more

Dedusting of pellets – virgin material

Separation of dust from re-processed material or granulated plastic (pellets). Gentle to the material and easy to build into the existing conveying system.
Read more

Dedusting of regrind

Kongskilde’s patented AirWash system is a plastics de-dusting system for simultaneous conveying and cleaning of material from granulators, mixers and other process equipment. Often used as inline process for continuous recycling of the waste from the moulding process.
Read more
Created with Sketch.

Granules conveying with TF injector

The injector system is ideally suited for conveying of material in low capacity installations. Capacities in granules 10m distance 4,5t/h, 150m distance 0,4t/h.
Read more

Granules conveying with rotary valve

Rotary valve system suitable for high and low capacity installations. Separation and conveying through a smooth pipe system. Tailor made systems with conveying distances up to 200m.
Read more
Created with Sketch.

Granules conveying with FVO system

Systems for conveying of granules with low specific weight, such as EPS and EPP. In particular suitable for not easily floating items.
Read more

Granules conveying with ITF system

Conveying of granules with low specific weight, like EPS and EPP.
Read more
Created with Sketch.

Conveying of blow moulded parts with FVO system

Conveying of blow moulded items by a controlled speed of air in order to minimize the impact on the conveyed items.
Read more

Conveying of flash and rejects

Tailor made systems to remove flash and rejects from blow moulding machines.
Read more
Created with Sketch.

Conveying of injection moulded parts

A modular system allowing flexibility and making it easy to install the solution where floor space is limited.
Read more
Created with Sketch.

Endless trim with ITF Venturi

A waste extraction system to handle trims from film, foil, and paper over longer distances. Very low noise level in the production area.
Read more
Created with Sketch.

Endless trim with FVO Venturi

Using air pressure to create a vacuum effect. Separation of different types of material through pipe diverters.
Read more

Cut trim with Venturi system

Conveying and evacuation of continuous cut trim in medium speed productions.
Read more
Created with Sketch.

Cut trim with RVS separator system

Downsizing of small sized waste of paper, plastic foil, aluminum foil and packaging material. Separation of material through pipe diverters. Particularly suitable where a strong suction effect is essential.
Read more
Created with Sketch.

Cut trim with RVS/KS vacuum system

This system utilizes the vacuum side of the blower creating a suction system pulling cut trim pieces into the RVS/KS separator.
Read more
Created with Sketch.

Conveying of off-cuts with FVO system

Suction of various types of off-cuts waste in high speed productions. Low maintenance with the blower as the only unit with moving parts (no contact with conveyed material).
Read more
Created with Sketch.

Conveying of off-cuts with RVS system

Evacuation of trim over longer distances from several production machines to one delivery destination.
Read more
Created with Sketch.

Conveying of tissue roles

Kongskilde’s Venturi systems. Efficient solutions for suction in high speed productions.
Read more

Skeleton downsizing and punch outs

Kongskilde MultiDicer has been designed for downsizing of die cut waste with a reduced demand for floor space.
Read more
Created with Sketch.

Shredded material with FVO system

Ideally suited for suction of shredded material from small shredders, the Kongskilde Inline Venturi system is an efficient and simple low maintenance solution.
Read more
Created with Sketch.

Shredded material with KS/RVS system

For evacuation of shredded material from more shredders to one destination (eg. a container w. compactor). No space required for storage and transportation and working environment is kept clean.
Read more

Newsletter

Sign up and get the latest news, inspiration, solution videos, and more, right in your inbox!